a. Working with the one of 5 preinstalled conversion curves, considering kind of material (heavy concrete; light (lightweight) concrete, compo (fine) concrete, ceramic and lime-sand bricks) and aggregate, age of concrete (from 1 days to 4 years) and its conditions of hardening (normal or steaming). There are the basically new functions: curve's correction adjusted for coefficient of coincidence and impact impulse's direction (5 directions: 0°, 45°, 90°, 135°, 180°) and kind of object consideration (slab, column, collar beam, girder etc.).
b. Showing the information as a bar diagram with the calculation of standard deviation and coefficient of variation, indication of maximal and minimal values in series, possibility of review and removing any intermediate value. There are transitions provided between the Modes while testing.
2. Memory Mode: the non-volatile memory stores measured values with test date, time, concrete type
and kind of object. The Memory Book may contain from 1000 to 5000 values, depending on Instrument's
configuration.
3. Settings Mode: provides establishing of minor parameters and help functions:
the number of series within the standard deviation and coefficient of variation calculating segment
selectable Unit (MPa, N/mm2, kg/cm2, psi)
outliers selection criterion (+ rejection limit)
thickness of carbonization layer

4. Services Mode:
memory organization characteristic (article type, date, material), date and time, auto switch-off timer, language.
Beton Pro Condtrol is equipped with standard interface RS-232, for connection with a computer, that
considerably expands their possibilities on creation of the reporting. It needs no linkages and additional
software supports. Original software package and USB transfer cable for PC are included.
5. Conversion Curve Mode: provides the individual conversion curves installation.
The process of product strength measuring is the following: a series of impacts (up to 15) is applied on the tested part, electronic block estimates the hardness and resilient properties of the tested material according to impact impulse parameters from the sclerometer, then it converts the impulse parameter into the strength,
inducing it on device visual display (in MPa). Algorithm of measuring results processing includes: Averaging of single values;

Comparing of each single value with the average one, with further rejection of single values with deviation from the average, which is more admissible;
- Averaging of single values left after rejection;
- Inducing and recording final strength value in memory.
Patented original sclerometer is equipped with new high - precision sensor. It is simple, reliable, compact and convenient in use. Applied sheet (not spiral) spring is not prestressed and constant in time.

Technical information:
Strength measuring range - 3…100 MPa
Measuring accuracy limit - 7%
Dimensions - 175x90x30 mm
Total weight (with the sclerometer) - 1,1 kg
One set includes: Electronic block, sclerometer, carrying case, strength ethalon, manual, transfer cable for PC, software CD.